Troubleshooting
I can't find"Maxell ANC1 "on my bluetooth device 's list/unstable connection
Disconnection occured within bluetooth working distance.
1. Please make sure there are no metals or other materials within
a relatively close range which will interfere with the Bluetooth
connection.
1. Make sure"
ANC1 "and your device are within
Bluetooth working distance.
2. Make sure ANC1 is charged and has enough power.
3. Perform a factory reset and re- attempt to pair again.
The tap controls don't seem to be working.
1. Check if the earbuds are connected with your Bluetooth device.
Recommended devices operating system -1OS8,0/ Android 4.3 and
above.
2. Tap sensors are only activated 1 second after successful
connection to avoid mis-operation.
EN
To Next Page
Loading...
