continued on next page
5049
5
Check Base Angle
Indicator for Correct
Recline
You may have to adjust the
base to achieve the right
recline angle.
From the back of the base,
squeeze the base recline
handle and lift or lower front of
base. The angle indicator will
turn green when correct angle
is achieved.
Locate Vehicle’s LATCH:
Lower Anchor/UAS Bars
Review your vehicle owner’s
manual for lower/UAS anchor
locations and lower anchor/UAS
belt use.
6
Attach Lower Anchor/UAS
Connector to Vehicle’s
Lower/UAS Anchor
Make sure arrows on
connectors are facing up.
Fasten one lower anchor/UAS
belt connector to the anchor
located in the vehicle seat
bight.
Repeat for other side of base.
Thread Free End of
LATCH: Lower Anchor/
UAS Up Belt Through Belt
Path Opening As Shown
7
8
To Next Page