Maxi-Cosi Mico XP User Manual

18
4
Rethread Harness
Strap Into Correct
Shoulder Harness
Slots For Your Child
For Child Fit,
see page 11.
5
Attach 1st Harness
Strap Loops to
Splitter Plate
• The sewn ends of the
harness strap loops
must face towards
you.
• Do not twist the
harness strap or the
harness adjustment
strap.
• Make sure the same
harness strap loops
are fitted completely
on both sides of the
splitter plate.
The harness system must be installed cor-
rectly. Do not use a child restraint with damaged
harness straps.
17
Check your child’s fit often.
Check your child’s fit often. If you cannot achieve a
snug harness fit for your child, see pages 22-26.
To learn how to check harness tightness, see pages
12-15.
Check the harness straps often for any wear
or damage.
sewn
end

Maxi-Cosi Mico XP Specifications

General

Product Name	Maxi-Cosi Mico XP
Category	Infant Car Seat
Weight Limit	4-30 lbs
Height Limit	Up to 32 inches
Base Included	Yes
Harness Type	5-point harness
Side Impact Protection	Yes
Machine Washable Fabric	Yes
Removable Seat Pad	Yes
Installation Type	LATCH, Belt
Safety Standards	Meets or exceeds Federal Safety Standards
Base Compatibility	Compatible with Mico XP base
Stroller Compatibility	Compatible with Maxi-Cosi strollers
Additional Features	Ergonomic handle