Maxi-Cosi Mico XP User Manual

32
Load Leg (On Select Models)
The load leg is stored under
the base. This is an optional
feature.
The base install is equally safe
with or without the use of the
load leg.
In a crash, load legs reduce
downward rotation, limit
rebound, provide additional
stability, and energy absorption.
• Fold the load leg out.
• Squeeze the buttons on the
load leg and pull it down until
it meets the vehicle floor.
• Release the buttons.
• Lift the front of the base while
holding the load leg in place
to lock it into position.
• It must be perpendicular to
the vehicle floor.
Do not use the load leg on top of vehicle
storage compartments. Review your vehicle
owner’s manual. Do not use the load leg if it
does not reach the fl oor of your vehicle. When
not in use, the load leg must be stored under
the base.
31
This base has a release lever
that has two functions; one
for LATCH: Lower Anchor and
one for vehicle belts.
Lockoffs prevent the vehicle
belt from loosening after
tightening.
Opening Release Lever
Lift release lever to open
Lockoff and release LATCH:
Lower Anchor belts.
Closing Release Lever
Push down on lever to close
Lockoff and to allow the
LATCH: Lower Anchor belts to
retract.
Release Lever for
Vehicle Belt Lockoff &
LATCH: Lower Anchor Belts

Maxi-Cosi Mico XP Specifications

General

Product Name	Maxi-Cosi Mico XP
Category	Infant Car Seat
Weight Limit	4-30 lbs
Height Limit	Up to 32 inches
Base Included	Yes
Harness Type	5-point harness
Side Impact Protection	Yes
Machine Washable Fabric	Yes
Removable Seat Pad	Yes
Installation Type	LATCH, Belt
Safety Standards	Meets or exceeds Federal Safety Standards
Base Compatibility	Compatible with Mico XP base
Stroller Compatibility	Compatible with Maxi-Cosi strollers
Additional Features	Ergonomic handle