EasyManua.ls Logo

Maxi-Cosi Moda - Installation Checks; Angle Configuration

Maxi-Cosi Moda
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Moda
I
Convertible Car Seat
I
Maxi-Cosi
I
19
DO NOT install convertible child restraints excessively reclined,
ensure the angle is no greater than 40°.
DO NOT adjust harness or tether strap hardware such that it sits
too close to the occupant.
Ensure that correct seatbelt path is used and that the restraint is
installed in the correct direction for rearward facing application.
Refer to page 28.
DO NOT wrap baby in a blanket or swaddled as infant can be
ejected and killed in an accident.
Ensure the harness ts the baby rmly.
Ensure that any blanket or other covering may only be placed over
the harness after the harness is adjusted rmly.
The infants legs are not be bound or wrapped together and the
arms are not bound or wrapped together.
Position seat ensuring that the angle is no
greater than 40˚ from horizontal plane.
Angular adjustment is achieved by adjusting the
base. Refer to page 25 for base adjustment.
Check Before Installation
Angle configuration for the seat
WARNINGS
4
Front of vehicle

Related product manuals