12 13
model no. 054-0252-2 | contact us 1-888-670-6682
OPERATING INSTRUCTIONS – DRY VACUUMING
Ensure that the power cord is
disconnected from the outlet.
Replace the top section on the tank,
and secure it in place using the clasps.
1
3
Ensure that the cartridge filter is
completely mounted. Ensure that the
filter is inserted all the way.
2
Insert the larger end of the hose into
the front inlet on the tank and lock it in
place. Push the required attachment on
to the free end of the hose or extension.
Plug the power cord into the power
outlet.
Turn the motor on by flipping the
switch to the “I” position.
Once you have finished vacuuming, flip the switch to the “O” position and unplug
the power cord from the power outlet.
DO NOT USE THE CARTRIDGE FILTER FOR LIQUID VACUUMING.
DO NOT USE DUST BAG FOR LIQUID VACUUMING.
4
5
6
7
WARNING!
Before starting
please read, understand, and apply the safety
instructions in Section 1. Reminder: DO NOT vacuum hazardous
substances. The use of an incorrect dust bag will invalidate the
warranty.
DRY VACUUM OPERATION
DRY VACUUM OPERATION
O = OFF I = ON
To Next Page
Loading...
General