Maximum 054-8286-4 - Troubleshooting

17
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES SOLUTIONS
The motor is
overheating.
Cooling vents are
obstructed.
Clean and clear vents.
Do not cover with hand
during operation.
Blade cannot be
removed.
Saw dust in the clamp
slot.
Clean the clamp slot
with a brush.
Cutting is difficult. Saw blade is damaged. Replace the saw blade.
If the problem remains unsolved after performing the checks described above,
call the toll-free helpline at 1-888-670-6682.
TROUBLESHOOTING