OPERATING INSTRUCTIONS
LED WORKLIGHT
The LED worklight, located next to the tool-less blade clamp of this tool, will
illuminate when the saw is turned on. This provides additional light on the
surface of the workpiece for operation in lower-light conditions. The LED
worklight will turn off when the saw is turned off.
UTILITY HOOK
Your tool is equipped with a convenient utility hook for hanging your tool. To
use, simply lift up hook until it snaps into the open position. When not in use,
always lower hook until it snaps into the closed position.
TURNING THE SAW ON AND OFF
To turn the saw ON, squeeze the trigger switch.
To turn the saw OFF, release the trigger switch.
The variable-speed trigger switch delivers higher speed with increased trigger
pressure and lower speed with decreased trigger pressure.
OPERATING INSTRUCTIONS
To Next Page
Loading...
