EasyManua.ls Logo

Maximum 055-6767-0 - User Manual

Maximum 055-6767-0
68 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
IMPORTANT:
Please read this manual carefully before using
this mitre saw and save it for reference.
Model no. 055-6767-0
INSTRUCTION
MANUAL

Table of Contents

Questions and Answers

  • T
    Thomas SchwartzAug 4, 2025
    What to do if my Maximum Saw motor does not start?
    • B
      Barry GrahamAug 4, 2025
      If the motor of your Maximum Saw doesn't start, there could be several reasons. First, check if the fuse has blown or the circuit breaker has tripped on your home panel. Ensure there is electrical power at the outlet. Another possible cause is a worn brush, which would require you to replace the brushes. Also, a limit switch failure can prevent the motor from starting, so consider replacing the limit switch.
  • C
    Christina HuffAug 13, 2025
    Why does the Maximum Saw blade brake not stop within 10 seconds?
    • J
      Joseph CamposAug 13, 2025
      If the brake on your Maximum Saw blade doesn't stop it within 10 seconds, several factors could be at play. The motor brushes might not be sealed or are lightly sticking, requiring inspection, cleaning, or replacement. An overheated motor brake, caused by using a defective or the wrong size blade or rapid cycling, could also be the cause; use a recommended blade and allow the saw to cool down. A loose arbour bolt can also cause this issue; retighten it. Cracked or damaged brushes can also cause this problem, so they should be replaced.
  • C
    Chelsea SmithAug 25, 2025
    What to do if Maximum Saw brush sparks when switch released?
    • W
      watkinsjuanAug 26, 2025
      If the brush sparks when the switch is released on your Maximum Saw, a possible cause is a worn brush. In this case, you should replace the brushes.

Summary

QUICK START GUIDE

SAFETY GUIDELINES

GENERAL SAFETY INSTRUCTIONS BEFORE USING THIS POWER TOOL

Essential safety rules before operating the power tool.

SPECIFIC SAFETY INSTRUCTIONS FOR THIS SLIDING MITRE SAW

Safety precautions specific to the sliding mitre saw.

DRESS FOR SAFETY

Guidelines on appropriate attire and personal protection for safe operation.

ASSEMBLY

REMOVING AND INSTALLING THE BLADE (Fig. 7, 8, 9)

ADJUSTMENTS

BEVEL STOP ADJUSTMENT (Fig. 17, 18)

OPERATION

MAKING A BASIC CUT (Fig. 33)

TROUBLESHOOTING GUIDE

TROUBLESHOOTING GUIDE - MOTOR

Common motor problems and their solutions.

TROUBLESHOOTING GUIDE - SAW OPERATION

Solutions for common issues encountered during saw operation.

Maximum 055-6767-0 Specifications

General IconGeneral
BrandMaximum
Model055-6767-0
CategorySaw
LanguageEnglish

Related product manuals