7
model no. 055-6766-2 | contact us 1-888-670-6682
SAFETY GUIDELINES
model no. 055-6766-2 | contact us 1-888-670-6682
6
SAFETY GUIDELINES
SAFETY GUIDELINES
This manual contains information that relates to PROTECTING PERSONAL SAFETY and
PREVENTING EQUIPMENT PROBLEMS. It is very important to read this manual carefully
and understand it thoroughly before using the product. The symbols listed below are
used to indicate this information.
• Store the operating instructions so that they are always available to the user of the tool
when it is being operated.
• Remove the protective padding around the motor before using.
• Pay close attention to instructions on reducing the risk of kickback.
• Always use push sticks when ripping narrow workpieces and when making non-through
cuts.
• If you lend this device to other people, always hand over these operating instructions
to ensure safe use. Instruct inexperienced people in accordance with these safety
instructions.
• Keep your work area tidy. Untidiness in your work area can cause accidents.
• Pay attention to the surrounding conditions. Do not expose the electric power tool to
rain. Do not use electric power tools in damp or wet conditions. Ensure that the work
area is well lit. Do not use electric power tools where there is a danger of fire or
explosion.
• Protect yourself against electric shocks. Avoid bodily contact with earthed parts (e.g.
pipes, radiators, electric hobs or cooling appliances).
• Keep other people away from the work area. Do not let other people, especially
children, touch the electric power tool or the power cable. Keep them away from your
work area.
• Store unused electric power tools safely. Unused electric power tools should be stored
in a dry, high-lying or locked place, out of the reach of children.
• Do not overload your electric power tool. It works better and more securely within the
stated output range.
• Use the correct electric power tool. Do not use inefficient machines for heavy work. Do
not use the electric power tool for purposes for which it was not intended. For example,
do not use circular saws to cut wooden masts or logs.
• Wear suitable clothing. Do not wear baggy clothing or jewellery, as they can be caught
by moving parts. When working outdoors, anti-slip shoes are recommended. If you have
long hair, wear a hair net.
• Wear safety equipment. Wear safety goggles. If the work creates dust, wear a dust
mask.
• Attach the dust extraction unit. If there are connections for dust extraction and
collection equipment, then make sure that the equipment is correctly attached and
used.
• Never use the cable for purposes for which it is not intended. Do not use the cable to
pull the plug out of the power socket. Protect the cable from heat, oil and sharp edges.
• Secure the workpiece. When necessary, use clamping devices to secure the workpiece.
The workpiece is secured better that way than by hand.
• Avoid taking abnormal stances. Make sure you stand securely and keep your balance
at all times.
• Look after your tool with care. Keep the cutting tool sharp and clean so that you are
WARNING!
• Read all the safety guidelines and instructions before you
use this electric power tool!
WARNING!
• When using electric power tools, the following essential
safety measures have to be observed to prevent electric
shocks, injury and fire hazards. Failure to adhere to the
safety guidelines and instructions can cause electric shock,
fire and/or severe injuries.
DANGER!
Potential hazard that will result in serious injury or loss of life.
WARNING!
Potential hazard that could result in serious injury or loss of life.
CAUTION!
Potential hazard that may result in moderate injury or damage to equipment.
Note: The word “Note” is used to inform the reader of something the operator needs to
know about the tool.
SAFETY RECOMMENDATIONS
These precautions are intended for the personal safety of the operator and others
working with the operator. Failure to follow these instructions may result in a permanent
loss of vision, serious personal or even fatal injury, property damage and/or tool damage.
Please take time to read and understand these instructions.
Safety is a combination of common sense, staying alert and knowing how your table saw
works.
GENERAL SAFETY RULES
• Store all safety guidelines and instructions for future use.
• This device is not intended for use by people (including children) lacking experience
with electrical power tools unless they have received some instruction about how the
device is to be used. Children have to be supervised to ensure that they do not play
with the device.
To Next Page
Loading...
Need help?
General
