scratch the surface.
4. Wipe the outside of the unit with a damp cloth, sponge or mild dish
soap.
5. Wipe away food residue and water inside or around component with a
paper towel.
6. Dry thoroughly before using again.
7. The removable interface is very easy cleaning as you can take it out
and re-assemble the airproof loop of sponge from the interface, and
put them into warm soapy water for safe washing.
Note: The airproof loop of sponge should be dried thoroughly before
re-assembling, when re-assembling, be careful to prevent any
damage, and assemble as original position to ensure no vacuum
leaking.
Preservation Bags
1. Wash bag material in warm water with a mild dishwashing soap.
2. Bags can be washed on the top rack in your dishwasher by turning
the bag inside out. Stand bags up so that the washing water can rinse
the entire surface.
3. Make sure that bags thoroughly dry before reusing.
Accessories (including canister base, cover and hose
accessories)
1. Washing all vacuum accessories in warm water with a mild
dishwashing soap, But do not immerse cover in water.
2. Canister bases (not lids) are top rack dishwasher safe. But canister
cover should be wipe down with a damp cloth.
3. Ensure the accessories to be dry thoroughly before reusing.
4. Canister and cover is not allowed to use in microwave or freezer.
Storing Your Vacuum Preservation System:
-Keep the unit in a flat and safe place, out of the reach of children.
-Do remember to make sure the upper lid of appliance is unlocked when
not in use and in storage.
To Next Page
Loading...
