2
LCD battery symbol and failure code
Safety Instructions
The LCD Battery Display indicates the Battery level. There are 5 segments
of the battery, approximately 20%-40%-60%-80%-100% capacity. During using,
segments will disappear from the display. When charging your PPS, you will
notice a battery segment blink at 1 second interval, which indicates the current
charge status and the number under INPUT shows the real-time charging
power. Once it is fully charged, all battery segments will be lit and remain solid.
When the product breaks down, the fault code is displayed at the input or
output power display, such as "E01"
Note: Charge your PPS when there is only one battery segment!
Safety Caution
1. Before using this product, please read the "safety instructions" carefully
to ensure correct and safe use. And please keep the instructions carefully, if the
equipment is damaged due to failure to operate as described in this manual,
the company has the right not to guarantee the quality.
2. Operate as required.
3. Avoid using the product in direct sunlight, rain or wet environment.
4. This product can not be used near the heat source area, or there are
electric heating furnace, heat furnace and other similar equipments.
5. When placing this product, keep a safe distance around it to ensure
ventilation
6. When cleaning, please use dry articles for wiping
7. In the re, please use dry powder re extinguisher correctly. There is a
danger of electric shock if you use a liquid re extinguisher
8. When using, please do not touch other parts inside the cabinet except the
terminal.
9. If this product needs maintenance, please contact us.
10. Operating temperature r: 0°C-40°C; Operating humidity: 5% - 90%.
To Next Page
Loading...
Need help?
General
