What to do if the timer indicator lamp lights up and Maxon Air Conditioner does not operate?
If the timer is activated on your Maxon Air Conditioner, the timer indicator lamp will light up, and the unit will be in ready mode, preventing normal operation. To resolve this, cancel the timer operation. The unit should then operate normally.
Why do the compressor and indoor fan stop intermittently in HEAT mode on my Maxon Air Conditioner?
In HEAT mode, the compressor and indoor fan of your Maxon Air Conditioner may stop intermittently to protect the compressor from overheated air if the room temperature exceeds the set temperature.
Why do the indoor and outdoor fans stop intermittently in HEAT mode on my Maxon Air Conditioner?
When your Maxon Air Conditioner is in HEAT mode, the indoor and outdoor fans may stop intermittently because the compressor operates in a reverse cycle to remove exterior ice. This intermittent stopping will occur for up to 20% of the total heat operation time.
Why does the compressor stop intermittently in COOL or DRY mode, and fan speed of the indoor unit decreases in Maxon MXI 18HC001?
In COOL or DRY mode, the compressor may stop intermittently, or the fan speed of the indoor unit may decrease on your Maxon Air Conditioner. This is to prevent inside/outside air from freezing, depending on the inside/outside air temperature.
Why is the compressor of the outdoor unit operating although it is turned off in HEAT mode in Maxon MXI 18HC001 Air Conditioner?
Even after being turned off in HEAT mode, the compressor of the outdoor unit of your Maxon Air Conditioner may continue to operate for up to 10 minutes (maximum) if de-icing is still in progress.
Why does the compressor stop operation intermittently in DRY mode on my Maxon MXI 18HC001 Air Conditioner?
In DRY mode on your Maxon Air Conditioner, the compressor operation is automatically controlled depending on the room temperature and humidity.
Why is fan speed setting not allowed in AUTO or DRY mode in Maxon MXI 18HC001?
When your Maxon Air Conditioner is in DRY mode, the indoor fan speed is set to low. In AUTO mode, the fan speed is automatically selected from 3 steps.
Details on how to securely mount the plate and drill holes for the unit installation.
Instructions for connecting electrical wiring for the air conditioning unit.
Detailed steps for connecting the refrigerant pipes between indoor and outdoor units.
Instructions for adding refrigerant, including amounts based on pipe length and unit type.
Procedures and checks for testing the air conditioner's operation after installation.
Troubleshooting steps for issues related to the unit not providing cooling.
Diagnosing and resolving problems causing reduced cooling performance.
Troubleshooting steps for issues related to the unit not providing heating.
Diagnosing and resolving problems causing reduced heating performance.
Troubleshooting issues when the air conditioner fails to start or switches off unexpectedly.
Troubleshooting when the unit shows no response to power or commands.
Identifying and resolving power supply related errors affecting the air conditioner.
Step-by-step guide for disassembling the indoor unit components.
Wiring diagram for the indoor unit, showing connections and components.
Wiring diagram for the outdoor unit, detailing electrical connections and layout.
General| Brand | Maxon |
|---|---|
| Model | MXI 18HC001 |
| Category | Air Conditioner |
| Language | English |
To Next Page