MAXPEEDINGRODS MXR-2Y - Introduction; 1.1 Overview

INTRODUCTION
01
PARKING AIR HEATER
05
1.1 Overview
The main unit of this parking air heater (the
"heater") is a small, microprocessor-controlled,
fuel-burning furnace. Its heat exchanger is located
in a hood-shaped case with a separate air
passage. Cold air is sucked into this air passage by
the fan, and hot air blown out, forming a heating
system independent of the vehicle's original
heating system. In this way, a vehicle’s cab or
passenger compartment can be heated whether
or not the engine is running. A schematic diagram
is shown in Fig. 1.
Fig. 1
PARKING AIR HEATER
06
Model : MXR-1F Model : MXR-2Y
1.2 Range of Application of the Heater
Pre-heating, de-misting windows
Heating and keeping warm the following:
– All kinds of automobiles and trailers
– Construction machinery
– Agricultural machinery
– Camper vans
– RVs
– Boats, ships, yachts
The air heater operating independently of an engine isintended
for installation in the following vehicles, depending on its
heating output:
– All types of vehicles (max. 8 seats + driver’s seat) and their trailers
– Construction machinery
– Agricultural machinery
– Boats, ships and yachts (only diesel heaters)
– Camper vans
1.3 Purpose of Heater
Model : MXR-1F