MAXPhotonics MA1-45 User Manual

1 -Safe Usage of Handheld Laser Welding Machine
Chapter 2
General Safety Information
s
Handheld laser welding machines fall under the hazardous Class 4 laser product
category due to their emission of invisible, infrared laser radiation with a wavelength
of 1080nm. With the welding head radiating over 100W on average, this high-
intensity light can cause direct or indirect damage to eyes and skin. In particular,
exposure to this laser beam may result in irreversible damage to the retina or cornea.
It is imperative to wear appropriately certified 1080nm near-infrared laser safety
glasses before operating a handheld laser welding machine to ensure safety.
IMPORTANT:
 Always avoid looking directly at the fiber output connector and ensure that you
are wearing appropriate protective eyewear while using the laser to prevent
potential eye injuries.
 Refrain from opening the laser device as there are no parts or accessories
intended for user access inside. All maintenance and repair work must be
performed by authorized service personnel only.
 Ensure proper grounding power supply and normal voltage when operating this
product.
3

MAXPhotonics MA1-45 Specifications

General

Brand	MAXPhotonics
Model	MA1-45
Category	Welding System
Language	English