MAXPhotonics MA1-45 User Manual

9
wear appropriate personal protective equipment (PPE), including safety goggles
and helmets with face shields. To maintain laser safety information, adhere to
laser control measures and operate the system correctly, otherwise, exposure to
detrimental radiation may occur.
1. Safety guidance
To ensure the safe use of the product and optimize its performance, please follow
the instructions, warnings, and precautions detailed in this manual.
WARNING:
Use the appropriate ground power supply when operating this product.
WARNING:
Do not open any parts within the product for maintenance. If required, contact
Maxphotonics laser technicians for servicing. Unauthorized alterations to this
product will void the warranty.
WARNING:
Be cautious when using hand-held welding tips connected to the output connector of
this product via optical fiber cable.
WARNING:
Adhere to the provided instructions as improper use may affect the safety
mechanisms of the product. This product must only be operated under conventional
conditions.
CAUTION:
Ensure the AC power is off when working with laser-welded output joints, such as

MAXPhotonics MA1-45 Specifications

General

Brand	MAXPhotonics
Model	MA1-45
Category	Welding System
Language	English