◎ The equipment does not contain any user-serviceable parts, and all servicing
should be done by qualified personnel. To avoid electric shock and voiding the
warranty, do not remove the protective cover or tamper with the product
proper power connections.
.
◎ External circuit connections, aside from power connections, should comply with
IEC 61140's PELV (protected extra-low voltage) definition. The non-power output of
other devices connected to this product must also be PELV or SELV (safe extra-low
voltage).
10. Environmental safety
Warning:
◎ Electronic devices must be disposed of in accordance with regional regulations
on electronic waste disposal.
◎ Ensure that all personal protective equipment (PPE) is compatible with the output
power and wavelength range indicated on the laser safety label attached to the laser.
◎ The laser may be damaged if the equipment is not handled carefully. Refer to the
product specifications for more information. This device is not intended for use in
areas where unprotected individuals or children may be present. Keep away from
sources of shock or vibration. Utilize appropriate housing to establish a laser-safe
work environment, which may include laser safety signage, interlocking mechanisms,
warning devices, and proper training and safety procedures. Do not operate the
output welding head at eye level.
◎ Humidity: Avoid exposing the device to high humidity levels (> 90% humidity).
To Next Page
Loading...
Need help?
General
