5
The Q-Switched Pulsed Fiber Laser (MFP100W-300W) Series products
provide a wide range of lasers, the emission wavelength of which is
centered at 1060nm. They are air-cooled and maintenance-free and
deliver high efficiency, high reliability, and high performance on marking
and engraving, which makes them ideal tools in this area.
Maxphotonics' Q-Switched Pulsed Fiber Laser (MFP100W-300W) Series
are Class 4 laser products and are designed and tested with safety. By
following this User Guide and applying sound laser safety practices, it will
be a safe and reliable device.
Laser light exhibits unique characteristics that may pose safety hazards.
Therefore, the laser light can’t be normally associated with other light
sources, and all operators and people near the laser must be aware of
these special hazards.
In order to ensure the safe operation and optimal performance of the
product, please follow all warnings and safety instructions in this guide
during process of operation, maintenance and service.
For ensuring the safety of operators, operators are urged not to open
the equipment privately at all times. There are no user serviceable
parts, equipment or assemblies associated with this product. Lasers of
unauthorized disassembly shall not be subject to warranty.
Chapter 1
Characteristic Explain
To Next Page
Loading...
Need help?
General
