MAXPhotonics MFSC-1500X G4.0 Series User Manual

32
Chapter 6 Operation Guide
check under the microscope.
（
6
）
Reinstall the inner cap and the outer sleeve onto the cleaned fiber
connector.
（
7
）
Take out the cap and sleeve, then connect the ber connector with cutting
head quickly and fasten them. (Place the cap face down on a clean surface or a
lint-free wipe.)
Take out the cap and sleeve
Install fiber connector under microscope

MAXPhotonics MFSC-1500X G4.0 Series Specifications

General

Brand	MAXPhotonics
Model	MFSC-1500X G4.0 Series
Category	Measuring Instruments
Language	English