MaxStream XStream X09-001 Series - User Manual

XStream™ OEM RF Module
XStream OEM RF Module
RF Module Operation
RF Module Configuration
RF Communication Modes
Appendices
Product Manual v5.x00
For XStream OEM RF Module Part Numbers: X09-001… X24-009… XH9-001…
X09-009… X24-019… XH9-009…
X09-019… XH9-019…
Reliable 900 MHz & 2.4 GHz OEM RF Modules by MaxStream, Inc.
355 South 520 West, Suite 180
Lindon, UT 84042
Phone: (801) 765-9885
Fax: (801) 765-9895
rf-xperts@maxstream.net M100018
www.maxstream.net 2006.02.24
Downloaded from Elcodis.com electronic components distributor

MaxStream XStream X09-001 Series Specifications

General

Frequency Band	902 - 928 MHz
Operating Temperature	-40°C to +85°C
Antenna Connector	RPSMA
Transmit Power	1 mW to 1 W
Output Power	1 W (30 dBm)
Interface	RS-232
Modulation	FHSS
Data Rate	Up to 115, 200 bps
Operating Voltage	3.0V to 5.5V DC

Summary

XStream OEM RF Module

Features

Overview of the module's key functionalities and capabilities.

Specifications

Detailed technical parameters including range, data rates, and power requirements.

Pin Signals

Electrical Characteristics

RF Module Operation

Serial Communications

How the module interfaces via its serial port for data transfer.

Modes of Operation

Explanation of the module's operational states: Idle, Transmit, Receive, Sleep, Command.

RF Module Configuration

Hands-on Programming Examples

Practical examples for configuring the module using AT and Binary commands.

Command Reference Table

Comprehensive table listing all AT and Binary commands and their parameters.

XStream Command Descriptions

Detailed explanations for each AT and Binary command for module configuration.

RF Communication Modes

Addressing

Basic Communications

Acknowledged Communications

Multi-Streaming Mode

Appendix B: Development Guide

Interfacing Hardware