Maxtec MaxO2ME User Manual

IV
866.4.Maxtec www.maxtec.com
TABLE OF CONTENTS
CLASSIFICATION ............................................... I
WARRANTY ................................................... I
WARNINGS ...................................................II
SYMBOL GUIDE................................................V
1.0 SYSTEM OVERVIEW ..........................................1
1.1 Base Unit Description ............................................1
1.2 Components Identification.........................................2
1.3 MAX-550E Oxygen Sensor ........................................4
2.0 SET-UP PROCEDURE .........................................4
2.1 Battery Installation ..............................................4
2.2 Calibrating the MaxO
2
ME Monitor ....................................5
2.2.1 Before You Begin ..............................................5
2.3 Set Operating Mode .............................................5
2.3.2 To Calibrate the MaxO
2
ME Monitor to 20.9% Oxygen ....................5
2.3.3 To Calibrate the MaxO
2
ME Monitor to 100% Oxygen ....................6
2.3.4 Factors Influencing Calibration ....................................6
3.0 OPERATING INSTRUCTIONS ...................................7
3.1 Alarm Setting Procedure ..........................................7
3.1.1 Low Alarm Setting .............................................7
3.1.2 High Alarm Setting.............................................8
3.1.3 Smart Alarm Mode.............................................8
3.2 Basic Operation ................................................9
3.3 Alarm Conditions and Priorities ......................................9
3.4 Backlight Operation ............................................10
3.5 Sleep Mode Operation...........................................10
3.6 External Power Supply Operation...................................10
4.0 SENSOR REMOVAL AND REPLACEMENT .........................11
5.0 PROBLEM SOLVING .........................................11
6.0 CLEANING AND MAINTENANCE ................................12
6.1 Cleaning .....................................................12
6.2 Alarm Testing .................................................13
6.3 Replacing Sensor Cable .........................................13
7.0 SPECIFICATIONS ...........................................13
7.1 Base Unit Specifications .........................................13
7.2 Sensor Specifications ...........................................14
8.0 APPLICATIONS ............................................14
8.1 Exposure to Anesthetic Gases .....................................14
8.2 Calibration Techniques in Pressurized Systems . . . . . . . . . . . . . . . . . . . . . . . . 14
8.3 Calibration Errors ..............................................15
9.0 SPARE PARTS AND ACCESSORIES ..............................16
9.1 Electromagnetic Compatibility ..................................17

Maxtec MaxO2ME Specifications

General

Brand	Maxtec
Model	MaxO2ME
Category	Medical Equipment
Language	English