PREFACE
This manual describes the function, operation and maintenance of the
MAXO
2
+
hand-held oxygen analyzer. A member of Maxtec’s MAXO
2
analyzer
line of oxygen analyzers and monitors, the MAXO
2
+
utilizes the MAX-250+
oxygen sensor and is engineered for long life, maximum reliability and stable
perfmance.
NOTE: In order to obtain optimum performance from your MAXO
2
+
analyzer, all operation and maintenance must be performed in accor-
dance with this manual. Please read the manual thoroughly before
using the analyzer and do not attempt any repair or procedure that is
not described herein. Maxtec cannot warrant any damage resulting from
misuse, unauthorized repair or improper maintenance of the instrument.
Thank You
Thank you for your purchase of a Maxtec MAXO
2
+
oxygen analyzer. We
appreciate the time and energy you invest in selecting the equipment best
suited to your needs. As exchange, we are supplying you with a reliable,
high-quality instrument that, with proper care and operation, will provide you
with years of exceptional service. We also encourage your comments or sug-
gestions as to how our equipment, in any way, can better serve your needs.
Please feel free to write, FAX or e-mail us at the address on page ii of this
manual c/o the Maxtec Marketing Department. Please visit our website www.
maxtec.com for more information on our products and services.
WARNING:
Never allow an excess length of tubing, lanyard, or sensor cable near a per-
son’s head or neck, which may result in strangulation.
Before use, all individuals who will be using the MAXO
2
+
must become thor-
oughly familiar with the information contained in this Operation Manual. Strict
adherence to the operating instructions is necessary for safe, effective product
performance. This product will perform only as designed if installed and oper-
ated in accordance with the manufacturer’s operating instructions.
Use only genuine Maxtec
®
accessories and replacement parts. Failure to do
so may seriously impair the analyzer’s performance. Repair or alteration of
the MAXO
2
+
beyond the scope of the maintenance instructions, or by anyone
other than an authorized Maxtec
®
service person, could cause the product to
fail to perform as designed.
Calibrate the MAXO
2
+
weekly when in operation, or if environmental condi-
tions change significantly. (ie. Elevation, Temperature, Pressure, Humidity —
refer to Section 4.0 of this manual).
iii
WWW.MAXTEC.COM
To Next Page
Loading...
Need help?
General
