iv
MANUFACTURED BY MAXTEC
Use of the MAXO
2
+
near devices that generate electrical fields may cause
erratic readings.
If the MAXO
2
+
is ever exposed to liquids (from spills or immersion) or to any
other physical abuse, turn the instrument OFF and then ON. This will allow
the unit to go through its self test to assure everything is operating correctly.
You may need to allow the sensor time to dry out.
Never immerse or expose the MAXO
2
+
(including sensor) to high tempera-
tures (>70°C). Never expose the device to pressure, irradiation vacuum,
steam, or chemicals.
NOTE: Replace the batteries with recognized high quality AA Alkaline or
Lithium batteries.
NOTE: If the unit is going to be stored (not in use for 1 month), we rec-
ommend that you remove the batteries to protect the unit from potential
battery leakage.
FAILURE TO COMPLY WITH THESE WARNINGS AND CAUTIONS COULD
RESULT IN INSTRUMENT DAMAGE AND POSSIBLY JEOPARDIZE THE
WELL BEING OF THE USER.
To Next Page
Loading...
Need help?
General
