MAXTEK DBW02 - FM Tuning and Station Selection

7
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
enquiries@quesh.co.uk
Instructions
Auto Tune FM
To auto tune to the next available radio station press and hold the
‘Scroll’ button for 3 seconds. This will start the radio to auto scan.
The scan will always stop and the next received signal. Repeat the
storing preset procedure to save the current station.
You can change between all stations and strong station for the FM
scan by pressing the ‘Menu’ button and selecting ‘Scan Setting’ with
the ‘Scroll’ dial.
Rotate the ‘Scroll’ dial to select either ‘Strong Stations’ or ‘All Stations’
and press the ‘Scroll’ dial to conrm the required selection.
The asterik in the top right corner indicates current selection.
You will be sent to the previous menu once a selection has been
made. Press the ‘Menu’ button to return to the main screen.
Manually Tune FM
Rotate the ‘Scroll’ dial in either direction to tune the radio in FM mode.
This helps in poor signal areas to get a clear signal. Repeat the
storing preset procedure to save the current station.