Need help?Do you have a question about the Maxwell HRC10 and is the answer not in the manual?
Step-by-step guide for mounting the windlass and securing it to the deck.
Location and requirements for the solenoid pack.
Safety requirement for circuit protection with specific amp ratings.
Procedure for lowering anchor using clutch and control panel/footswitch.
Procedure for raising anchor using clutch and control panel/footswitch.
Step-by-step guide for mounting the windlass and securing it to the deck.
Location and requirements for the solenoid pack.
Safety requirement for circuit protection with specific amp ratings.
Procedure for lowering anchor using clutch and control panel/footswitch.
Procedure for raising anchor using clutch and control panel/footswitch.
General| Model | HRC10 |
|---|---|
| Manufacturer | Maxwell |
| Voltage | 12V |
| Rope Size | 12mm |
| Category | Windlass |
| Application | Anchoring |
| Maximum Pulling Load | 1000 kg |
| Retrieval Speed | 12 m/min |
To Next Page
