MaxxOne Kite - Page 15

14
• App Sengs
In this area, users can adjust the following sengs:
- Change App Language: It supports mul-languages which can be easily switched in the App.
- Passcode Lock: By enabling this feature, you would be asked to enter the passcode every
me when App is acvated from the background. In iPhone, the Touch-ID feature would be
supported so users can use their ngerprints to use this App.
- Help & Feedbacks: Users can watch some tutorials online and also send feedbacks to our
company directly in App.
• Advanced Sengs
In this area, users can adjust the following sengs:
- Entry Delay: Users can decide which sensors’ alarm signal should be held for a preset me
unl the alarm goes o.
- Exit Delay: By enabling it, the system would wait for the preset me before really working
when the ARM or HOME ARM buon is pressed.
- Siren Duraon: It denes how long the built-in siren should keep blaring while alarming.
- Network & Password Sengs: It allows to reset the networking parameters or the system
password.
• Share with Others
The owners can easily share their devices with others, even they have not installed the App yet.
- [Device Sengs]-[Share Device] would generate a unique QR code which is linked to the
current main box and the assigned authories.
- Users can send this QR code to others by Facebook or Whatsapp.
- Scanning the QR code, users could launch the App if it has been installed before, or go to App
Store or Google Play to install the App.
- The shared main box would be added into the App when launched in the invited users’ phone.