MaxxOne Kite - Quick Setting up

7
Quick Setting Up
- Please search My Kite in App Store or Google Play, or scan the QR code printed on the package to visit the download
page directly.
• Install the Latest App
- Please ensure the router you are using has already been connected to the Internet with DHCP mode enabled. Kite
supports IPV4 protocol only.
- The system supports the following networking type:
- LAN: 10/100M ethernet
- WiFi: 2.4GHz, WEP/WPA/WPA2 encrypted
• Prepare the Internet Networking
- If you are using WiFi connecon for the box, try your phone rst to see if it could be connect to that WiFi around the
installing locaon, to ensure the WiFi signal can be received by the main box.
• Put the Main Box to a Suitable Place
- Open the baery cover on the back, turn OFF the power switch.
- Open the SIM slot and insert the SIM card. Standard SIM card is required. If you are using the Nano-SIM or Micro-SIM,
please use card adapter to make sure it could t the slot.
- Close the SIM slot.
• Install the SIM Card (Oponal)
- Connect the power cable.
- Turn ON the power switch.
- Wait a few seconds unl the LED indicator on the front cover light up brightly.
• Power ON