Hydraulic Cylinder
The folding mechanism relies on a hydraulic cylinder. This is filled with oil under high pressure.
If a cylinder is damaged; the safe folding of the treadmill deck is no longer guaranteed. It must then
be replaced before raising the treadmill deck again.
Hydraulic Cylinder
Safety Lever
Transport
When folded, the treadmill can be moved easily and without much effort.
Move the treadmill as follows:
Abbildung Laufband ähnlich
Step 1:
Fold up the treadmill as instructed here in the Folding Mechanism section.
Step 2:
Take hold of the top ends of the deck on both sides with your left and right hands
and pull the deck towards you until the weight of the deck is resting on the
transport rollers.
Make sure that you are standing with your feet firmly on the ground.
Step 3:
The treadmill can now be moved easily and without much effort.
Make sure that there are no items, pets or children in the way when you are
moving the treadmill.
Make sure that your feet are steadily on the ground when moving the treadmill.
Step 4:
To set the treadmill safely down again, lift the deck right up until the front frame
base is completely on the ground.
CAUTION:
The treadmill should only be moved by an adult.
To Next Page
Loading...
Need help?
General
