EasyManua.ls Logo

Maxxus MX-J206-01 - Sauna Maintenance Procedures; Cleaning Guidelines

Maxxus MX-J206-01
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
The temperature
display shows "H"
The temperature inside the
sauna room is too
high
Turn off the unit, and contact
the manufacturer
9
Speaker does not
work
The speaker is broken
Replace with a new one of
the same specifications
The speaker wire is loose
Disconnect and reconnect
the speaker connections
The power indicator light for
CD is off
Turn on the switch to start
work
10
CD-Player doesn’t
work
Power connector is loose or
damage
Disconnect and reconnect
the connection
DC power supply has no
power to the CD-player
Check DC power supply
wiring or replace the power
supply
CD-player is defective
Replace the CD-player
CD-player protection fuses
is burnt out
Replace the fuses
Maintenance
Cleaning
Do not use liquid cleaners or aerosol cleansers inside the sauna. Unplug the sauna from
the wall outlet before cleaning. Use plain water and a soft cloth for cleaning. Do not use
benzene, alcohol, or strong cleaning chemicals in or on the sauna. NOTE: Any
chemical that can damage wood or be absorbed into the wood will damage the
sauna.
Page 21

Related product manuals