8
Cleaning & Maintenance
Disposal
Recomended Accesories
Cleaning:
Clean the tra ining device ea ch time after training with a damp cloth to remove any sweat and or liq uids. Do not
use solvents. Dry o the cleaned areas thoroughly.
Regular cleaning helps to keep your de vice in good condition and thereore also signicantly contributes to the
length of its service life.
The costs of repairing a training device which has not been properly maintained will not be covered in any way
by the warranty.
Also clean th e traction cables regularly.
Cleaning and Lubricating the Chrome Guide Pipes
The weight plate guide pipes and guide tubes must also be cleaned and lubricated regularly to guarantee opti-
mum smooth running. To achieve this clean them with a da mp cloth and some liquid soap or washing up liquid.
Alternatively, you can use the MAXXUS® degreaser spray (optionally available). Ater this, dry the guide pipes
o thoroughly and lubricate them with MAXXUS® lubrica nt spray (optionally available) leaving a thin lm on the
surface.
With regular use you should lubricate th e guide pipes once a month. If squeaking noises occur during training
the pipes req uire lubricating immediately. MAXXUS® degreaser and lubricating sprays are available rom our
Online Shop at www.maxxus.com.
Maintenance
Checking the Fixing Materials
At least once a month you must check that the screws and nuts are tightened securely and tighten them if nec-
essary.
This device is recyclable. It must be disposed of properly at the end of its serviceable life. Never dispose of your
training device in the normal household waste. Only dispose it at a municipal or at an authorised waste disposal
company.
Observe current valid regulations. If you are in any doubt, enquire at your municipal or local authority as to
where you can nd an authorised and environmentally riendly disposa l service.
These accessories are best suited for use with your training device. All products are available from our online shop
at www.maxxus.com
MAXXUS® Degreaser Spray - Optimum cleaner or cle aning o dirt and maintaining the
guide pipes and roller surfaces.
MAXXUS® Lub ricating Spray – Optimum lubrication for guide pipes.
MAXXUS® Anti- Static Spray – Eective ag ainst the static charges created in rames ,
clothing and training computer s. Devices wh ich are located on carpets or synthetic oors
will become statically charged. MAXXUS ® Anti-Static Spray will deter this.
Synthetic surace s treated with MAXXUS® Anti-Static Spray do not attract dust as quick-
ly and will remain clean for longer.
MAXXUS® Special Foam Cl eaner – Use for regular cleaning of your training device.
Plastic covers and metal frames can be easily clean ed and perfectly maintained with
MAXXUS ® Special Foam Cleaner. It is also suitable or cleaning pulse belts and other
training accessori es.
To Next Page
Loading...
Need help?
General
