To Next PageTo Next Page
Need help?Do you have a question about the Maytag LSG7806AAQ and is the answer not in the manual?
General| Brand | Maytag |
|---|---|
| Model | LSG7806AAQ |
| Category | Washer/Dryer |
| Language | English |
Instructions for U.S. models, including conformity with national fuel gas code for gas dryers.
Instructions for Canadian models, including conformity with CAN/CGA installation codes for gas dryers.
Guidance for owners on retaining instructions, ensuring proper power, and checking for accessory packages.
Detailed steps for removing the carton, disconnecting wiring, and freeing the dryer from its base.
Specifies zero clearance, floor support, and stability needed for installation and servicing.
Key facts for the washer, including capacity, water usage, motor, power, hose lengths, and water requirements.
Key facts for the dryer, including air flow, exhaust, motor, heat source, capacity, and electrical needs.
Guidelines for installing in alcoves/closets, mobile homes, and required air openings.
Ensuring adequate air for dryer operation and access for servicing the unit.
Critical safety advice against exhausting into concealed spaces and promoting proper lint removal.
Details on routing exhaust through an outside wall or cabinet back.
Maximum lengths and bend allowances for flexible metal ductwork.
Maximum lengths and bend allowances for rigid metal ductwork.
Warnings regarding wiring, grounding, and adherence to national/local codes.
Essential steps for proper grounding to reduce shock risk.
Optional grounding kit installation for specific code requirements.
Specific instructions for grounding U.S. electric dryers via wiring system or conductor.
Guidance for electric dryers protected by a Ground Fault Interrupter.
Details on 4-wire hookups, including receptacle types and wiring connections.
Information on 208 volt operation and specific electrical requirements for Canadian models.
Recommendations for gas supply line size, connections, and leak testing.
Procedure for checking gas leaks using soap solution and information on the automatic ignition system.
Steps for moving and positioning the dryer and stand, including leveling.
Instructions for connecting the power cord for electric dryer models.
List of available accessory kits for dryer installation.
Steps for preparing the washer, removing packaging, and installing inlet hoses.
Steps for installing the drain hose and correctly positioning the washer relative to the dryer stand.
Instructions for connecting the control cables to electrically mate the washer and dryer.
Connecting dryer power, final washer leveling, and removing tub block.
Checklists for verifying correct dryer and washer installation before consumer use.
Notes on 50 Hz operation and the lack of routine lubrication requirements.
Guidance on cleaning, protecting finishes, and actions to take in case of water damage.
Information on how to obtain replacement parts and service manuals.
