EasyManua.ls Logo

Maytag LSE7806ACM User Manual

Maytag LSE7806ACM
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LEAVE THESE INSTRUCTIONS WITH THE OWNER
iMPORTANT TO iNSTALLER
REMOVE THE DOOR FROIVl ALL DISCARDED
APPLIANCES SUCH AS DRYERS AND
COMBINATION WASHER/DRYERS TO AVOID
THE DANGER OF A CHILD SUFFOCATING
SHOULD HE/SHE CRAWL INSIDE AND THE
DOOR BE SHUT.
THE APPLIANCE MUST NOT BE INSTALLED
OR STORED IN AN AREA WHERE IT WILL BE
EXPOSED TO WATER AND/OR WEATHER.
U.S. MODELS
PLEASE READ THE FOLLOWING INSTRUC-
TIONS CAREFULLY BEFORE STARTING TO
INSTALL THE DRYER. FOR GAS DRYERS,
THE INSTALLATION MUST CONFORM WITH
THE NATIONAL FUEL GAS CODE ANSI
Z223.1, LATEST REVISION. ANY QUESTIONS
CONCERNING THIS SHOULD BE REFERRED
TO THE LOCAL GAS UTILITY.
CANADIAN MODELS
PLEASE READ THE FOLLOWING INSTRUC-
TIONS CAREFULLY BEFORE STARTING TO
INSTALL THE DRYER. FOR GAS DRYER
INSTALLATION, REFER TO STANDARD
CAN/CGA B149 (.1 OR .2) INSTALLATION
CODE. ANY QUESTIONS SHOULD BE
REFERRED TO THE LOCAL GAS UTILITY.
This folder contains information of interest to the
owner. After the appliance has been properly
instafled, LEAVE THESE INSTRUCTIONS
WITH THE OWNER.
SERVICE CALLS PERFORMED
AS A RESULT OF POOR
INSTALLATION ARE THE
RESPONSIBILITY OF THE
INSTALLER.
printed in U,S,A, 6 3717020
Question and Answer IconNeed help?

Do you have a question about the Maytag LSE7806ACM and is the answer not in the manual?

Maytag LSE7806ACM Specifications

General IconGeneral
BrandMaytag
Model NumberLSE7806ACM
Product TypeWasher/Dryer
TypeFront Load
Fuel TypeElectric
ColorWhite
Dryer Capacity7.0 cu. ft.
Energy Star CertifiedYes
Width27 inches
Warranty1 Year Limited
Amperage30 A
Wash CyclesNormal
Voltage120/240 V

Summary

Installer Safety and Model-Specific Notes

Important to Installer

Critical safety advice and precautions for installers before starting.

Model-Specific Installation Advice

Installation instructions tailored for U.S. and Canadian models.

Owner Information and Uncrating

Important to Owner

General advice and tips for the appliance owner's reference.

Uncrating Procedures

Step-by-step guide to safely remove the stacked washer/dryer from its packaging.

Preinstallation Considerations and Specifications

Location and Floor Requirements

Guidance on selecting an appropriate installation location and floor support.

Washer and Dryer Specifications

Key technical facts and dimensions for both the washer and dryer units.

Exhausting and Venting Requirements

Confined Space Venting

Clearance and make-up air needs for alcove, closet, and confined installations.

Mobile Home Venting

Specific exhaust requirements and safety standards for mobile home installations.

Vent Ductwork Guidelines

Rules for direct exhaust, duct limitations, and ensuring service access.

Electrical and Grounding Installation

Power Supply Requirements

Voltage, amperage, and circuit needs for gas, electric, 208V, and Canadian models.

Grounding Procedures

Essential grounding steps, additional methods, and G.F.I. considerations.

4-Wire Electrical Hookup

Detailed instructions for connecting a 4-wire electrical system.

Water Supply and Drainage

Water Supply Specifications

Requirements for water pressure and temperature for the washer.

Drainage System Requirements

Specifications and guidelines for the washer's drain facility.

Gas Connection and Ignition

Gas Supply Connection

Safe and proper procedures for connecting the gas supply line.

Gas Ignition System

Information about the dryer's automatic ignition system.

Installing the Dryer Unit and Stand

Connecting Dryer Utilities

Steps for connecting gas, exhaust vent, and power to the dryer.

Positioning and Leveling Dryer

Adjusting the dryer and stand for proper placement and stability.

Dryer Installation Accessories

List of optional accessory kits available for dryer installation.

Installing the Washer Unit

Prepare Washer and Remove Packing

Removing shipping pads, tub block, and crate base wires.

Connect Washer Water Supply

Installing the inlet hoses to the washer and water faucets.

Connect Washer Drain and Controls

Attaching the drain hose and control cables between units.

Washer Installation Accessory Kits

List of optional accessory kits available for washer installation.

Final Installation Checks and Checklists

Final Utility Connections

Connecting the dryer power cord and securing the washer in the stand.

Installation Verification Checklists

Checklists to confirm all dryer and washer installation steps are completed.

Additional Information and Maintenance

Operational Notes and Finish Care

Details on odd cycles, lubrication, and protecting the appliance finish.

Safety and Replacement Parts

Precautions for water damage and information on ordering replacement parts.

Related product manuals