4-57
REMOVE DRIVE CAM
Remove the brake assembly
(see page 4-56).
1.
C clip
T Bearing
Remove the C clip with a small flat blade
screwdriver.
Slide the drive cam off the shaft.
The T bearing is an integral part of the
washer operation. If it wears out you will
need to order a new basket drive which
comes as an assembly including a new T
bearing.
2.
3.
•
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
To Next Page
Loading...
