Do you have a question about the Maytag MDB4949SDM0 and is the answer not in the manual?
Requirements for grounding a cord-connected dishwasher to prevent electric shock.
Requirements for grounding a permanently connected dishwasher via wiring.
Guidelines for properly loading dishes, securing items, and avoiding obstructions.
Choosing the appropriate wash cycle based on soil level and desired results.
Customizing the wash cycle with available options like Delay or Hi Temp.
Steps to start a new cycle or resume an interrupted one using START/RESUME.
Troubleshooting steps for when the dishwasher fails to start or stops mid-cycle.
Actions to take when the clean light is flashing, indicating a potential issue.
Steps to fix issues where the dishwasher fails to drain, checking hoses and disposers.
Requirements for grounding a cord-connected dishwasher to prevent electric shock.
Requirements for grounding a permanently connected dishwasher via wiring.
Guidelines for properly loading dishes, securing items, and avoiding obstructions.
Choosing the appropriate wash cycle based on soil level and desired results.
Customizing the wash cycle with available options like Delay or Hi Temp.
Steps to start a new cycle or resume an interrupted one using START/RESUME.
Troubleshooting steps for when the dishwasher fails to start or stops mid-cycle.
Actions to take when the clean light is flashing, indicating a potential issue.
Steps to fix issues where the dishwasher fails to drain, checking hoses and disposers.
| Style | built-in dishwashers |
|---|---|
| Color | monochromatic stainless steel, stainless steel |
| Cycle Selections | powerblast, auto, normal, quick, rinse |
| Options/Settings | heated dry, hi temp wash, sani rinseĀ®, control lock, 1-24 hour delay |
| Delay Start | yes |
| Number of Racks | 2 |
| Cycle Signal | yes |
| Water Filter | yes |
| Food Disposer | yes |
| Sanitize Settings | no |
| Annual Energy Consumption | 270 kilowatt hours |
| Voltage | 120 volts |
| Current | 15 amperes |
| Depth | 25.2 inches |
|---|
Loading...