EasyManuals Logo

Maytag MDB4949SDM0 User Manual

Maytag MDB4949SDM0
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
,5 = SeJect a CycJe(cyclesvarybymodel)
Efficient dishwashers run longer to save water and energy, just as
driving a car slower saves on gas. Estimated cycle time will be
displayed. Cycle times may increase or decrease depending on
selections. Estimated cycles times after calibraton are listed below.
6 = SeJectOptions(optionsvarybymodel)
You can customize your cycles by pressing the options desired. If you
change your mind, press the option again to turn off the option. Not all
options are available for every cycle. If an invalid option is selected for a
given cycle, lights will flash.
7, Start or Resumea CycJe
NOTE: Run hot water at sink nearest your dishwasher until water is hot.
Turn off water.
If Start/Resume button is located on top of door, push door firmly
closed within 4 seconds of pressing START/RESUME. If door is not
closed within 4 seconds, the Start button LED will flash, an audible
tone will be heard (on top control models), and cycle will not start.
IMPORTANT: If anyone opens the door (such as, adding a dish, even
during the Delay Hours option), Start/Resume button must be pressed
each time.
If Start/Resume button is located on front of door, push door firmly
closed. The door latches automatically. Select the wash cycle,
options and press START/RESUME or press START/RESUME to
repeat the same cycle and options as in previous wash cycle.
This information covers several different models. Your dishwasher may not have all cycles and options described.
Targets toughest food soils. Use for hard-to-clean heavily soiled pots, pans, casseroles, and tableware.
PowerBlast TM
(D
3:28 9.0 (34.0)
normal
©
This cycle with only the Heated Dry option selected, and without other options selected, is
recommended to completely wash and dry a full load of normally soiled dishes. The energy usage label
is based on this cycle and option combination.
1:51 3.8 (14.5)
rinse
©
Use for rinsing dishes, glasses, and silverware that will not be washed right away.
Do not use detergent. During cycle, the rinse action will repeatedly pause for several seconds.
Cycle times may increase depending on water temperature, heavy soil condition, dish load size and options selected.
*Adding options will add time to cycle. See options information.
:11 1.3 (4.9)
©
detay
Runs dishwasher at a later time or during off-peak electrical
hours. Select a wash cycle and options. Press Delay one
time for each additional hour of delay up to 24 hours. Press
START/RESUME. Close door firmly.
NOTE: Anytime door is opened (such as, to add a dish),
START/RESUME button must be pressed again to resume
delay countdown.
Available Delays start of a
with any cycle up to
cycle 24 hours.
NA NA

Other manuals for Maytag MDB4949SDM0

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Maytag MDB4949SDM0 and is the answer not in the manual?

Maytag MDB4949SDM0 Specifications

General IconGeneral
Stylebuilt-in dishwashers
Colormonochromatic stainless steel, stainless steel
Cycle Selectionspowerblast, auto, normal, quick, rinse
Options/Settingsheated dry, hi temp wash, sani rinse®, control lock, 1-24 hour delay
Delay Startyes
Number of Racks2
Cycle Signalyes
Water Filteryes
Food Disposeryes
Sanitize Settingsno
Annual Energy Consumption270 kilowatt hours
Voltage120 volts
Current15 amperes
Weight and Dimensions IconWeight and Dimensions
Depth25.2 inches

Related product manuals