Need help?Do you have a question about the Maytag MDG4000BWW and is the answer not in the manual?
General introduction to the automatic dryer installation.
Essential safety precautions and gas leak response procedures.
Initial steps for physically installing the dryer unit.
Procedures for safely connecting the gas supply.
Necessary items and conditions before starting dryer installation.
Crucial information and warnings specifically for the installer.
Factors to consider when choosing a location for the dryer.
Requirements for installing the dryer in alcoves or closets.
Specific requirements for installing dryers in mobile homes.
Rules for duct material, diameter, length, and safe exhaust termination points.
Details on gas type conversion, supply line size, and shut-off valve requirements.
Information on pipe joint compound and the gas ignition system.
Importance and methods of grounding the dryer for safety.
Electrical connection requirements specific to gas dryer models.
Instructions for making electrical connections and specific grounding safety rules.
Electrical specifications for Gas, Electric, and U.S. models.
Adherence to electrical codes and safety warnings for installation.
Information regarding operation on 50 Hz AC electrical service.
A list of available accessories for dryer installation.
Information on obtaining replacement parts and accessories.
First steps for installing the dryer, including moving and preparing it.
Instructions for leveling the dryer and installing the exhaust duct.
Step-by-step instructions for connecting the gas supply safely.
Instructions for connecting the dryer using a 3-wire electrical system.
Instructions for connecting the dryer using a 4-wire electrical system.
Visual guide and steps for connecting power cords to the terminal block.
Step-by-step guide to change the door swing direction.
Checklist items to verify connections, operation, and safety after installation.
To Next Page
General
