6, Switch door catch, bezel, & plug
f
Catch and bezel Plucj
8, Flip door over
\
Flip door over so handle side is down.
Remove the door catch, bezel, and plug from the inside of
the inner door by squeezing and pulling/pushing them. Place
the door catch, bezel, and plug on the sides opposite from
where they were.
7, Rotate outer door
Rotate outer door 180 ° and set it back down on inner door.
Reattach outer door panel to inner door panel so handle is
on the side where hinges were just removed. Insert 4 door
screws.
Reattach door hinges to dryer door so that the larger hole is
at the bottom of the hinge.
18
To Next Page
Loading...
