Maytag MEDB835DC4 User Manual (English)

Questions and Answers:

S
shannonjenningsAug 20, 2025
How to fix a Maytag Dryer that will not run?
- D
  davidwilliamsAug 20, 2025
  If your Maytag dryer won't run, ensure the door is completely closed. Firmly touch and hold the START button for 2-5 seconds. Also, check your household fuses or circuit breakers, as electric dryers often use two. Replace any blown fuses or reset tripped breakers. If issues persist, consult an electrician. Electric dryers need a 240-volt or 208-volt power supply, so verify this with an electrician. Finally, ensure you're using a time-delay fuse.
J
Justin WoodAug 22, 2025
Why is my Maytag MEDB835DC4 not heating up?
- R
  rossnatalieAug 22, 2025
  If your Maytag dryer isn't heating, the drum may still be turning. Electric dryers use two household fuses or circuit breakers, so replace any blown fuses or reset tripped circuit breakers. If the issue continues, call an electrician. Electric dryers need a 240-volt or 208-volt power supply, so check with a qualified electrician. For gas dryers, ensure the valve on the gas supply line is open.
W
williamsamberAug 25, 2025
Why are my clothes not drying in my Maytag Dryer?
- A
  Adam HessAug 25, 2025
  If clothes aren't drying well or drying times are too long in your Maytag dryer, clean the lint screen before each load and also clean the space where the lint screen is located, using a vacuum to gently remove any accumulated lint. Ensure the exhaust vent and outside exhaust hood aren't clogged with lint; run the dryer on Air Only for 5–10 minutes and check for air movement at the outside exhaust hood. The exhaust vent should also be the correct length and use 4" (102 mm) diameter vent material. Make sure the dryer is level, so clothes contact the moisture sensors during Sensor cycles. Select the correct temperature setting for the garments being dried, avoiding the Air Only setting.
M
Michael HuynhAug 27, 2025
Why is my Maytag MEDB835DC4 Dryer making a rattling noise?
- B
  Brad GrayAug 27, 2025
  If your Maytag dryer is making a rattling or vibrating noise, check the front and rear edges of the drum for small objects, and remember to clean out pockets before laundering. Ensure the dryer is properly leveled, with all four feet firmly contacting the floor. If clothing is balled up, separate the items and restart the dryer.
M
Michael PerezAug 28, 2025
What to do if my Maytag MEDB835DC4 Dryer takes too long to dry clothes?
- J
  jjonesAug 28, 2025
  To address clothes not drying well or long drying times in your Maytag dryer, separate large or heavy loads for freer tumbling. Ensure fabric softener sheets aren't blocking the grille and use only one sheet once. The dryer needs temperatures above 45ºF (7ºC) to work properly. If the dryer is in a closet, ensure the doors have ventilation openings and the dryer has enough airspace (minimum of 1" (25 mm) in front and 5" (127 mm) in the rear).
T
Tyler ThompsonAug 29, 2025
Why is there lint on my clothes after drying in my Maytag MEDB835DC4?
- B
  Bradley ReedAug 29, 2025
  If your Maytag dryer has lint on the load, clean the lint screen before each load.
K
Krista GarciaSep 1, 2025
Why is my Maytag Dryer load too hot?
- M
  Mr. David CarterSep 1, 2025
  If your Maytag dryer load is too hot, allow the dryer to complete the cool down portion of the cycle before removing the load. If using a Timed Dry cycle, select a Sensor Cycle with a lower heat setting to prevent overdrying.
S
Stephen ZimmermanSep 2, 2025
Why is my Maytag MEDB835DC4 Dryer making a thumping noise?
- C
  Christopher HebertSep 2, 2025
  If your Maytag dryer is making a thumping noise, especially if it hasn't been used in a while, this is normal. The sound should diminish after a few minutes of use.
S
Sydney LucasSep 4, 2025
What does “Check Vent” mean on my Maytag MEDB835DC4?
- L
  Laura RossSep 4, 2025
  If the “Check Vent” cycle status indicator lights up on your Maytag dryer (indicating a blocked vent or low airflow), the lint screen or vent is likely clogged, crushed, kinked, or has too many turns. The dryer will continue to run; touch any key to clear the code from the display and return to the estimated time remaining.
M
Mrs. Jessica JohnsonSep 6, 2025
Why is the cycle time too short on my Maytag MEDB835DC4 Dryer?
- K
  Kelly RomeroSep 6, 2025
  If your Maytag dryer cycle time is too short, level the dryer, ensuring all four feet firmly contact the floor. If using the Steam Refresh cycle for 1 or 2 items, add a towel to help avoid uneven spraying from the steam valve. Also, adjust the dryness level setting on Sensor Cycles to increase or decrease drying time.

Maytag MEDB835DC4 Specifications

General

Color	silver
Dryer Capactity	8.8 cubic feet
Number of Cycles	10
Cycle Selections	power dry, heavy duty, bedding, sanitize, normal, denim, wrinkle control, delicates, rapid dry, timed dry
Options	end of cycle signal, lint filter indicator, quad baffles, moisture sensor, interior light, automatic dry control
Stackable	no
Venting	true, vented
Temperature Settings	5
Temperature Selections	high, medium, low, extra low, air only
Temperature Control	yes
Child Lock	no
Cycle Signal	yes
Interior Light	yes
Moisture Sensor Option	yes
Steam	no
Smart Home	no
Voltage	240 volts

Weight and Dimensions

Depth	32 1/4 inches
Height	43 inches
Width	29 inches
Net Weight	147 pounds

Summary

Dryer Safety

Fire Hazard Warning

Installation requires a qualified installer; avoid plastic/foil venting to prevent fire risk.

Important Safety Instructions

General Dryer Safety Precautions

Follow basic precautions to reduce risk of fire, electric shock, or injury.

Fire or Explosion Hazard Warning

Failure to follow warnings may result in serious injury, death, or property damage.

California Proposition 65 Warnings

Warnings regarding chemicals known to cause cancer or reproductive harm.

Check Your Vent System for Good Air Flow

Good Air Flow Importance

Proper venting reduces drying times and improves energy savings.

Energy Saver Option

Option to increase energy savings with lower heat, extending drying times.

Using Sensor Cycles

Utilize sensor cycles for enhanced fabric care and energy savings.

Steam Dryer Performance Tips

Tips for optimal performance with steam dryer features.

Control Panel and Features

Control Panel Overview

Explains the layout and function of the control panel for steam and non-steam models.

Power and Cycle Controls

Describes the Power button, Cycle Control Knob, and Start/Pause function.

Cycle Adjustment Features

Details Timed Dry Adjust, LED Display, Temperature, Dry Level, and Wrinkle Prevent.

Dryer Options and Status Indicators

Additional Dryer Options

Details options like Energy Saver, Static Reduce, Damp Dry Signal, and Audio Level.

Cycle Status Indicator Lights

Explains the meaning of indicator lights like Sensing, Check Vent, Good Airflow, Steam, Done, Check Lint Screen.

Cycle Guide – Sensor Cycles

Sensor Cycle Operation

Explains how sensor cycles use moisture sensing to determine dryness.

Heavy Load Cycles

Details cycles like Power Dry and Heavy Duty for large, heavyweight loads.

Fabric Care Cycles

Covers cycles like Normal, Wrinkle Control, and Delicates for various fabric types.

Specialty Cycles

Includes Bedding, Sanitize, and Denim cycles for specific needs.

Load Size Recommendations

Provides guidelines for small, medium, and large load sizes for optimal drying.

Cycle Guide – Timed Cycles

Adjusting Timed Dry Cycles

Instructions on adjusting drying time and temperature for Timed Cycles.

Timed Dry and Rapid Dry Cycles

Details on Timed Dry and Rapid Dry cycles, including settings and options.

Cycle Guide – Steam Cycles

Steam Refresh Cycle Details

Information on using the Steam Refresh cycle for wrinkle and odor removal.

Steam Cycle Load Size

Guidance on load sizes for optimal performance in steam cycles.

Using Your Dryer

Dryer Operation Warnings

Critical warnings regarding explosion and fire hazards during dryer operation.

Preparing the Dryer

Steps for cleaning the lint screen and loading the dryer properly.

Starting the Dryer

Instructions on how to power on and start the dryer.

Using Your Dryer Steps

Select Dryer Cycle

Guide to selecting the appropriate cycle for your laundry load.

Add Options and Start

Instructions for selecting additional options and starting the drying cycle.

Post-Cycle Actions

Advice on prompt garment removal and using Wrinkle Prevent.

Adjusting Sensor Cycle Settings

Changing Default Dryness Levels

Procedure to adjust sensor drying settings to increase or decrease dryness levels.

Additional Features: Using the Drying Rack

Drying Rack Installation and Use

Instructions for installing and using the drying rack with Timed Dry cycles.

Drying Rack Operation Steps

Step-by-step guide for using the drying rack, from setup to starting the cycle.

Dryer Care and Maintenance

Dryer Location Cleaning

Keep the dryer area clear and free from obstructions for airflow.

Lint Screen Cleaning

Detailed procedures for cleaning the lint screen after each load and as needed.

Dryer Interior Cleaning

Methods for cleaning the dryer drum and interior.

Accumulated Lint Removal

Guidance on removing lint from the dryer cabinet and exhaust vent.

Non-Use, Storage, and Moving Care

Non-Use or Storage Guidelines

Guidelines for operating the dryer only when home and for extended periods.

Moving Care Instructions

Procedures for preparing the dryer for moving.

Special Instructions for Steam Models

Water Inlet Hose Maintenance

Recommendations for inspecting and replacing the water inlet hose.

Dryer Winterization Procedure

Steps to prepare the dryer for freezing weather.

Dryer Re-Use Procedure

Steps to reconnect and use the dryer after winterizing.

Electrical Shock Hazard Warning

Direct-Wired Dryer Preparation

Disconnecting Power and Wiring

Steps for disconnecting power and wiring for direct-wired dryers.

Steam Model Specifics for Direct-Wired

Steam model instructions for shutting off water and disconnecting hose.

Securing Dryer Components

Ensuring leveling legs are secure and taping the dryer door.

Reinstalling the Dryer

Troubleshooting Dryer Operation

Dryer Will Not Run Issues

Solutions for the dryer not starting, including door closure and power supply.

Dryer Will Not Turn Off Issues

Troubleshooting steps if the dryer does not turn off.

Dryer Will Not Heat Issues

Solutions for the dryer not producing heat, checking power and fuses.

Unusual Dryer Noises

Explains common noises like humming, thumping, rattling, and clicking.

Troubleshooting Dryer Results

Clothes Not Drying or Long Drying Times

Addresses issues with clothes not drying properly or taking too long.

Cycle Time Too Short

Troubleshooting for cycles ending too early or not completing.

Lint on Load or Stains on Load

Solutions for lint transfer or stains on clothes.

Wrinkled Loads

Advice on preventing wrinkles in dried loads.

Dryer Odors

Troubleshooting causes and solutions for odors in the dryer or on clothes.

Steam Not Occurring During Wrinkle Prevent

Troubleshooting why steam is not activating during the Wrinkle Prevent option.

Troubleshooting Dryer Display Codes

Power Failure Code (PF)

Procedure to clear and resume cycle after a power interruption.

Low Voltage Code (L2)

Troubleshooting low or no line voltage conditions affecting the dryer.

Check Vent Indicator

Resolving issues related to blocked vents or low airflow.

Variable Service Codes (F# E#)

Identifying and resolving specific service codes indicating a need for repair.

Maytag Laundry Limited Warranty

Obtaining Warranty Service

Information on how to contact customer service and required information for service.

What is Covered by Warranty

Details of the first year and ten-year limited warranty coverage.

What is Not Covered by Warranty

Exclusions from warranty coverage, including usage and cosmetic issues.

Warranty Disclaimers

Disclaimers regarding implied warranties and representations outside the warranty.

Dryer Safety (French)

Safety Alert Symbol Explanation

Explanation of the safety alert symbol and warning terms (DANGER/AVERTISSEMENT).

Fire Risk Warning (French)

Warning regarding installation and venting materials to prevent fire risk.

Related product manuals

Maytag MEDB835DC4 User Manual

Table of Contents

Questions and Answers:

Maytag MEDB835DC4 Specifications

Summary

Dryer Safety

Fire Hazard Warning

Important Safety Instructions

General Dryer Safety Precautions

Fire or Explosion Hazard Warning

California Proposition 65 Warnings

Check Your Vent System for Good Air Flow

Good Air Flow Importance

Energy Saver Option

Using Sensor Cycles

Steam Dryer Performance Tips

Control Panel and Features

Control Panel Overview

Power and Cycle Controls

Cycle Adjustment Features

Dryer Options and Status Indicators

Additional Dryer Options

Cycle Status Indicator Lights

Cycle Guide – Sensor Cycles

Sensor Cycle Operation

Heavy Load Cycles

Fabric Care Cycles

Specialty Cycles

Load Size Recommendations

Cycle Guide – Timed Cycles

Adjusting Timed Dry Cycles

Timed Dry and Rapid Dry Cycles

Cycle Guide – Steam Cycles

Steam Refresh Cycle Details

Steam Cycle Load Size

Using Your Dryer

Dryer Operation Warnings

Preparing the Dryer

Starting the Dryer

Using Your Dryer Steps

Select Dryer Cycle

Add Options and Start

Post-Cycle Actions

Adjusting Sensor Cycle Settings

Changing Default Dryness Levels

Additional Features: Using the Drying Rack

Drying Rack Installation and Use

Drying Rack Operation Steps

Dryer Care and Maintenance

Dryer Location Cleaning

Lint Screen Cleaning

Dryer Interior Cleaning

Accumulated Lint Removal

Non-Use, Storage, and Moving Care

Non-Use or Storage Guidelines

Moving Care Instructions

Special Instructions for Steam Models

Water Inlet Hose Maintenance

Dryer Winterization Procedure

Dryer Re-Use Procedure

Electrical Shock Hazard Warning

Direct-Wired Dryer Preparation

Disconnecting Power and Wiring

Steam Model Specifics for Direct-Wired

Securing Dryer Components

Reinstalling the Dryer

Troubleshooting Dryer Operation

Dryer Will Not Run Issues

Dryer Will Not Turn Off Issues

Dryer Will Not Heat Issues

Unusual Dryer Noises

Troubleshooting Dryer Results

Clothes Not Drying or Long Drying Times

Cycle Time Too Short

Lint on Load or Stains on Load

Wrinkled Loads

Dryer Odors

Steam Not Occurring During Wrinkle Prevent

Troubleshooting Dryer Display Codes

Power Failure Code (PF)