To Next PageTo Next Page
Need help?Do you have a question about the Maytag MEDB880BW0 and is the answer not in the manual?
Explains DANGER, WARNING symbols and their implications for safety.
Details installation and venting requirements to prevent fire risk.
Lists chemicals known to cause cancer and reproductive harm.
Lists all tools and parts needed for dryer installation.
Provides diagrams and specifications for dryer placement and clearances.
Specific placement rules for dryers installed in garages.
Details water connection needs for steam models.
Outlines installer duties and adherence to electrical codes and ordinances.
Explains 3-wire vs. 4-wire connections and mobile home requirements.
Details requirements for UL listed power supply cords and strain relief.
Instructions on safely laying the dryer down for leg installation.
Steps for installing and adjusting the dryer's leveling legs.
Detailed steps for connecting a power supply cord to the dryer.
Guides selection between 4-wire, 3-wire, and direct wire options.
Initial steps for connecting neutral and ground wires for 4-wire setup.
Step-by-step guide for connecting all wires for 4-wire power.
Steps for connecting a 3-wire power supply cord to the dryer.
Guidance on attaching the strain relief for direct wire connections.
Instructions for making direct wire electrical connections to the dryer.
Steps to prepare the 4-wire cable for direct wiring installation.
Steps for preparing and connecting a 3-wire direct wire cable.
Steps for preparing wires for an optional 3-wire connection.
Specifies acceptable and prohibited vent materials for dryer exhaust.
Rules for installing rigid and flexible metal vents for proper exhaust.
Guidance on selecting and installing exhaust hoods and elbows.
Instructions for using clamps and avoiding tape/screws for vents.
Information on optional vent cover kits for unused exhaust holes.
Describes kits for close clearance vent installations with mismatches.
Guidelines for choosing the best vent path and minimizing turns.
Explains how charts determine vent length for optimal drying performance.
Steps for turning off water and preparing hoses and fittings.
Instructions for connecting the short hose and Y-connector to the faucet.
Guidance on properly tightening hose couplings to prevent leaks.
Steps for installing the exhaust hood and sealing the wall opening.
Instructions for securely attaching the vent to the exhaust hood.
Steps for connecting the long hose to the Y-connector assembly.
Instructions for connecting the long hose to the dryer's fill valve.
Steps to turn on water supply and check all connections for leaks.
Steps for connecting the vent hose to the dryer's exhaust port.
Instructions on moving the dryer into its final position.
How to use a level to ensure the dryer is balanced correctly.
Procedures for adjusting the dryer's legs for proper leveling.
A checklist of final items to verify after completing installation.
Checks to perform if the dryer does not start or shows errors.
Initial steps to protect surfaces and open the dryer door for modification.
Steps to detach the dryer door and its hinges from the unit.
Instructions to move the door strike to the opposite side for reversal.
Steps for reattaching the door after reversing its swing direction.
General
