Need help?Do you have a question about the Maytag MFR40PN and is the answer not in the manual?
General| Brand | Maytag |
|---|---|
| Model | MFR40PN |
| Capacity | 4.0 cu. ft. |
| Color | White |
| Configuration | Freestanding |
| Control Type | Electronic |
| Energy Star Certified | No |
| Voltage | 120 V |
| Frequency | 60 Hz |
| Width | 27 inches |
| Depth | 27 in |
Covers essential safety precautions for operating Maytag washers.
Illustrates and lists the main components and dimensions of the washer.
Lists technical specifications for various capacity Maytag washers.
Guides on turning on, starting, and understanding basic operation.
Covers daily cleaning and checks for washer maintenance.
Addresses issues and solutions related to leaks in the washer's water inlet hoses.
Explains the function and use of the Maytag washer's various operating controls.
Explains the electro-mechanical operation of the Maytag washer's door lock system.
Discusses the drain valve's function, maintenance, and troubleshooting.
Describes water inlet valves, their operation, and common issues.
Details the role of the inverter in controlling the Maytag washer's motor speed.
Guides users on navigating the program mode on the MFR PD model's interface.
Explains how to use the control panel and programming features of the MFR PN model.
Detailed steps for removing the control board from PD and PN models.
Instructions for safely removing and replacing the EPROM chip on the control board.
Steps for removing the motor and motor mounting plate on various MFR models.
Procedures for removing AKO, Mitsubishi inverters, and brake resistors.
Steps for removing the drain valve and the temperature sensor.
Detailed steps for removing the cabinet from MFR30-80 models.
Procedure for removing the cabinet from MFR18 and MFR25 models.
Steps for removing the trunnion and basket assembly from MFR18 and MFR25 models.
Procedure for removing and replacing bearings in the trunnion assembly for MFR18 & 25.
Guides on how to test the inverters used in Maytag commercial washers.
Detailed steps for performing motor phase and winding tests.
Guides on how to test the Maytag washer's control board for proper function.
Guidance on troubleshooting issues with Mitsubishi inverters in Maytag washers.
Guidance on troubleshooting issues with AKO inverters in Maytag washers.
Provides a systematic approach to diagnosing issues with the washer's control board.
Guides on diagnosing and resolving issues with the Maytag washer's motor.
Guides on diagnosing and resolving issues with the Maytag washer's drain valves.
Guides on diagnosing and resolving issues with the Maytag washer's door lock mechanism.
Guides on diagnosing and fixing door leaks in Maytag washers.
Guides on diagnosing and fixing over-filling conditions in Maytag washers.
To Next Page
