Why my Maytag MVWB750WQ0 Washer won't spin?
If your Maytag Washer won't spin, you may need to check the lid switch. Also, unplug the washer or disconnect power, and check the harness connections. Another possible cause is the motor.
How to fix a Maytag Washer that won't agitate?
If your Maytag Washer won't agitate, you can try the following: - Ensure the basket is floating. - Unplug the washer or disconnect the power. - Check the harness connections. - Inspect the lid switch and the motor.
Why my Maytag MVWB750WQ0 is doing all hot fills?
If your Maytag Washer is experiencing all hot fills, a possible cause is that the ATC thermistor is stuck in a high resistance range.
How to return cycle settings to factory defaults on Maytag Washer?
To return your Maytag Washer cycle settings to factory defaults, press POWER/CANCEL, then select the Drain & Spin cycle. Next, press EXTRA RINSE, FABRIC SOFTENER, EXTRA RINSE, FABRIC SOFTENER within 5 seconds. If done correctly, the display will show “Fd” for 3 seconds, and then the washer will return to Standby Mode.
General| Brand | Maytag |
|---|---|
| Model | MVWB750WQ0 |
| Type | Top Load Washer |
| Capacity | 4.7 cu. ft. |
| Color | White |
| Energy Star Certified | No |
| Wash Cycles | 11 |
| Spin Speed | 700 RPM |
| Deep Fill Option | Yes |
| Power Source | Electric |
| Height | 42 in |
| Steam Function | No |
| Depth | 27 inches |
To Next Page
