9
5. Add fabric softener
Pour a measured amount of liquid fabric
softener into dispenser; always follow
manufacturer’s directions for correct amount
of fabric softener based on your load size.
Dilute liquid fabric softener by filling the
dispenser with warm water until liquid reaches the underside
of the rim. See Max Fill line arrows.
IMPORTANT: The Rinse Options knob must be set to either
1 Rinse with Fabric Softener or 2 Rinses with Fabric Softener
when using fabric softener in the fabric softener dispenser.
This ensures that fabric softener is added at the correct time
in the rinse phase and is evenly distributed.
Adding Liquid Fabric Softener Manually to Wash Load
During the final rinse, wait until the washer has completed filling
and press the START/PAUSE button to pause the washer. Lift the
lid and add the measured, recommended amount of liquid fabric
softener. Do not use more than the recommended amount. Close
the lid and press the START/PAUSE button again to start the
washer.
4. Add liquid chlorine bleach
to dispenser
Do not overfill, dilute, or use more than 1 cup (236 mL). Do not
use color-safe bleach or Oxi products in the same cycle with
liquid chlorine bleach.
Turn cycle knob to choose your wash cycle. For more
information, see “Cycle Guide.”
6. Select cycle
3. Load laundry into washer
Load garments in loose heaps evenly
around basket wall. For best results, do
not pack the load tightly. Do not wrap large
items such as sheets around the agitator;
load them in loose piles around the sides of
the basket. Try mixing different-sized items
to reduce tangling.
IMPORTANT: Do not tightly pack or force items into washer.
Items need to move freely for best cleaning and to reduce
wrinkling and tangling.
MAX FILL
To Next Page
Loading...
Need help?
General
