Maytag MVWX500XW0 User Manual

WASHER INSTALLATION INSTRUCTIONS
INSTRUCTIONS POUR UINSTALLATION DE LA LAVEUSE
Table of Contents
WASHER SAFETY ......................................................... 1
iNSTALLATiON REQUIREMENTS ................................ 2
Tools and Parts ................................................................ 2
Location Requirements .................................................. 2
Drain System ................................................................... 3
Electrical Requirements ................................................. 4
iNSTALLATiON iNSTRUCTiONS .................................. 4
Before you start: remove shipping materials ............... 4
Connect Drain Hose ........................................................ 5
Connect Inlet Hoses ........................................................ 6
Level Washer ................................................................... 7
Complete Installation Checklist ..................................... 8
Table des matibres
SECURIT¢:: DE LA LAVEUSE ................................................ 9
EXIGENCES D'INSTALLATION ................................................. 9
Outillage et pi_ces .................................................................... 9
Exigences d'emplacement .................................................... 10
Syst_me de vindange .............................................................. 10
Specifications _lectriques ...................................................... 11
INSTRUCTIONS D'INSTALLATION ........................................ 12
Avant de commencer : retrait du materiel d'exp_dition ...... 12
Raccordement du tuyau de vidange ...................................... 13
Raccordement des tuyaux d'arriv_e d'eau ........................... 14
(=tablissement de I'aplomb de la laveuse .............................. 15
Liste de v_rification pour I'ach_vement de I'installation ..... 16
iNSTALLATiON NOTES NOTES CONCERNANT L'INSTALLATION
Date of purchase:
Date of installation:
Installer:
Model number:
Serial number:
Date d'achat:
Date d'installation:
Installateur:
Num_ro de module:
Num_ro de s_rie:
WASHER S_ETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
W10240509A
W10240510A=SP

Maytag MVWX500XW0 Specifications

General

Brand	Maytag
Model	MVWX500XW0
Category	Washer
Language	English

Summary

Washer Safety

Installation Requirements

Tools and Parts

Lists all necessary tools and parts required before starting the washer installation.

Location Requirements

Details the proper location for the washer to ensure optimal performance and minimize noise.

Drain System

Floor standpipe drain system

Specifies requirements for installing a drain hose into a floor standpipe.

Wall standpipe drain system

Outlines the necessary specifications for a wall standpipe drain setup.

Floor drain system

Details requirements for connecting the drain hose to a floor drain, including kits.

Laundry tub drain system

Provides guidelines for draining the washer into a laundry tub.

Electrical Requirements

Installation Instructions

Before you start: remove shipping materials

Instructions on removing all shipping materials before proceeding with the installation.

Move washer

Guidance on safely moving the washer to its installation location.

Remove shipping base

Steps to remove the shipping base from the washer to prepare for installation.

Remove packing tray from drum

Process for removing the packing tray from inside the washer drum.

Free power cord

Steps to detach and position the power cord for easier access.

Attach drain hose to drain port

Instructions on connecting the drain hose securely to the washer's drain port.

Place drain hose in standpipe

Guidance on correctly positioning the drain hose in a standpipe or laundry tub.

Remove drain hose form (floor drain installations only)

Specific step for removing the drain hose form for floor drain setups.

Connect inlet hoses to water faucets

Instructions for attaching the water inlet hoses to the hot and cold water faucets.

Clear water lines

Procedure to flush water lines to prevent clogs before connecting.

Connect inlet hoses to washer

Steps for connecting the water inlet hoses to the washer's water inlet valves.

Check for leaks

How to check for any leaks at the hose connections after installation.

Secure drain hose

Instructions on how to secure the drain hose to prevent it from dislodging.

Level Washer

Check levelness of washer

Method for checking if the washer is level using a spirit level.

Adjust leveling feet

Steps to adjust the washer's leveling feet to ensure stability.

Tighten leveling feet

Final step to secure the leveling feet against the washer cabinet.

Complete Installation Checklist