EasyManua.ls Logo

Maytag MXS Series - User Manual

Maytag MXS Series
142 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
10/05/2023, 09:17
Maytag Service Manual
https://www.serviceconnections.org/static/media/flipbook/Maytag MXS Flipbook/mobile/index.html#p=12
1/142
W10602872
SERVICE MANUAL
Maytag Commercial
MXS Series
PD
&
PN
Washers
WASHER MODELS:
MXS65, MXSSS, MXS40, MXS30, MXS25 & MXS20
PD&PN
TECHNICAL EDUCATION

Table of Contents

Questions and Answers

  • K
    Katherine LeeAug 12, 2025
    What to do if the water level is incorrect in my Maytag Washer?
    • J
      Jennifer ButlerAug 12, 2025
      If you're experiencing an incorrect water level in your Maytag Washer, here are a few things to check: * Ensure the programmed water levels are correct. * Verify that the correct Machine Type is selected in the Configuration Menu. * If you've changed the Machine Type, remember that standard water levels can only be reinitialized by programming new values or by loading the Standard Wash programs again.
  • A
    Anthony MillerAug 18, 2025
    What to do if the display of my Maytag MXS Washer is not illuminated?
    • T
      tommy83Aug 18, 2025
      If the display on your Maytag Washer is not illuminated, here's what you can check: * Ensure the external power supply is switched on and the washer is receiving external power. * Deactivate the emergency button. * Confirm the power connector is properly connected. * Inspect the wiring and ensure the connector is correctly connected. * If the display lights up after these checks, verify that the input signals or the +16Vdc Supply Signal are not touching the cabinet. * If there is no Flash Memory inserted in its socket on the wash computer, use the correct software and Flash Memory.
  • J
    Joseph JonesAug 27, 2025
    Why is my Maytag MXS Washer showing 'Bootloader' and not running the application?
    • N
      Nicole WagnerAug 27, 2025
      If your Maytag Washer display shows 'Bootloader' but the application doesn't run, it's likely because there's no software loaded in the application. To fix this, load the application software from the USB flash drive.
  • C
    Caroline GarzaSep 3, 2025
    How to improve the readability of the text on my Maytag Washer display?
    • D
      dunlapthomasSep 3, 2025
      If the text on your Maytag Washer display is difficult to read, adjust the brightness and viewing angle in the Configuration Menu until the display is clear.

Maytag MXS Series Specifications

General IconGeneral
Series NameMXS Series
BrandMaytag
CategoryWasher
Number of Temperature Settings5
Number of Spin Speed Options5
Energy Star CertifiedYes
Capacity4.5 cu. ft.
ColorWhite
Number of Wash Cycles12
Steam FunctionYes

Related product manuals