EasyManua.ls Logo

Maytag MXS20 - User Manual

Maytag MXS20
142 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
10/05/2023, 09:17
Maytag Service Manual
https://www.serviceconnections.org/static/media/flipbook/Maytag MXS Flipbook/mobile/index.html#p=12
1/142
W10602872
SERVICE MANUAL
Maytag Commercial
MXS Series
PD
&
PN
Washers
WASHER MODELS:
MXS65, MXSSS, MXS40, MXS30, MXS25 & MXS20
PD&PN
TECHNICAL EDUCATION

Table of Contents

Other manuals for Maytag MXS20

Preview: Installation Instructions
Installation Instructions28 pages
Preview: Programming Guide
Programming Guide80 pages

Questions and Answers

  • M
    Mary LesterAug 12, 2025
    What to do if the water level is incorrect in my Maytag MXS20?
    • C
      Carmen DeckerAug 12, 2025
      If you're experiencing an incorrect water level in your Maytag Washer, here are a few things to check: * Ensure the programmed water levels are correct. * Verify that the correct Machine Type is selected in the Configuration Menu. * If you've changed the Machine Type, remember that standard water levels can only be reinitialized by programming new values or by loading the Standard Wash programs again.
  • K
    Karen CarterAug 18, 2025
    What to do if the display of my Maytag MXS20 Washer is not illuminated?
    • M
      Monique SmithAug 18, 2025
      If the display on your Maytag Washer is not illuminated, here's what you can check: * Ensure the external power supply is switched on and the washer is receiving external power. * Deactivate the emergency button. * Confirm the power connector is properly connected. * Inspect the wiring and ensure the connector is correctly connected. * If the display lights up after these checks, verify that the input signals or the +16Vdc Supply Signal are not touching the cabinet. * If there is no Flash Memory inserted in its socket on the wash computer, use the correct software and Flash Memory.
  • A
    Ann KleinAug 27, 2025
    Why is my Maytag MXS20 showing 'Bootloader' and not running the application?
    • M
      Michael PruittAug 27, 2025
      If your Maytag Washer display shows 'Bootloader' but the application doesn't run, it's likely because there's no software loaded in the application. To fix this, load the application software from the USB flash drive.
  • J
    jobrienSep 3, 2025
    How to improve the readability of the text on my Maytag MXS20 display?
    • D
      Dale HorneSep 3, 2025
      If the text on your Maytag Washer display is difficult to read, adjust the brightness and viewing angle in the Configuration Menu until the display is clear.

Maytag MXS20 Specifications

General IconGeneral
ColorWhite
Smart FeaturesNo
Control TypeElectronic
Energy Star CertifiedYes
Voltage120 V
Number of Wash Cycles12
Width27 inches

Related product manuals