How to unlock Maytag Washer door after power outage?
To unlock the door of your Maytag Washer during a power outage: First, remove the front panel. Reach over the edge of the front panel on the door lock side. Push the emergency door opening button, then turn the door handle to the right. Finally, open the door.
What to do if Maytag Washer displays an error message?
To resolve error messages on your Maytag Washer, use the Diagnostic Program. This program will test the individual functions of the washer one by one to help determine the problem.
Safety guidelines for operating commercial washers.
Procedures for testing water inlet valves and door lock components.
Testing contactors, inverters, motor windings, transformers, and sensors.
Troubleshooting steps for when the washer door will not unlock.
A comprehensive list of fault codes, their causes, and recommended actions.
General| Wash Cycles | 12 |
|---|---|
| Steam Function | Yes |
| Energy Star Certified | Yes |
| Delay Wash | Yes |
| Deep Fill Option | Yes |
| Power Requirements | 120 V, 60 Hz |
| Smart Features | Wi-Fi Enabled |
| Color | White |
To Next Page
