EasyManuals Logo

Maytag MXR Series User Manual

Maytag MXR Series
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
3-18
1. To access and service the chemical
dispenser, lift the cover of the dispenser.
2. The bottom side of the cover is marked 1,
2, 3 and a flower symbol for prewash, main
wash, bleach and fabric softener
3. The two right chemical dispenser cups have
siphon covers that can be removed for
cleaning. Use a small flat blade screwdriver
to pry the top corner of siphon away from
the edge and lift the siphon off the tube.
NOTE: These siphons need to be cleaned
frequently to avoid build up of chemicals.
Clean up inside the tube and all around the
chemical dispenser cup.
4. A dispenser block-off cover can be installed
to prevent access to the pre-wash or bleach
dispensers. Insert the block-off cover into
the desired dispenser and push down until
the tabs on the front and back of the cover
click into position.
5. To remove a block-off cover, use a small flat
blade screwdriver to pry under the corner
of the cover and release the clips from the
dispenser.
CHEMICAL DISPENSER

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Maytag MXR Series and is the answer not in the manual?

Maytag MXR Series Specifications

General IconGeneral
BrandMaytag
ModelMXR Series
CategoryWasher
LanguageEnglish

Related product manuals