Controls at a Glance
_1_A6
Large
Cold
(:;dd
Oversize Capacity Plus / ©uiet Seres
Heavy Duty ! 2 Speed Motor ! 10 Cycles
Water Level
Wash/Rinse Temp
Step _1_
Select Water Level
Determine the selected setting based on clothes load
size. Selection should provide sufficient water to per-
mit clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to adjust
the water level after agitation begins. To adjust the
water level, turn the control to RESET and then back to
the desired setting.
WATER LEVEL SETTING
Oversize
Large
Medium
Mini
LOAD SIZE
3/4 - Full
1/2 - 3/4 Full
1/4 - 1/2 Full
1/4 Full
REMEMBER: Items must circulate freely for best results.
Step
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold
water for washing and cold or warm water for rinsing.
Use the chart below as a guide.
WASH/RINSE TEMPS LOAD TYPE
Hot/Cold
Warm/Warm Delicate items
White and heavily soiled,
color-fast items
Moderately soiled,
Warm/Cold colored items;
most permanent press items
Cold/Cold Brightly colored, lightly soiled
items; washable woolens
REMEMBER: In wash water temperatures below 65 ° F, deter-
gents do not dissolve well or clean well. Care labels define
cold water as up to 85 ° F.
To Next Page
Loading...
