Maytag SDG3606AWW User Manual

Installation
Instructions
Gas Dryer
Keep instructions for future reference.
Be sure manual stays with dryer.
f
You'll Need a Few Things Before You Begin
Stainless Steel cJ _@_
or Hard Pipe _ _
Gas Connector ÷_t-_. _
Teflon Tape or
Joint Compound
Duct Tape
Wrench
Screw _
Drivers
Level
REMOVE PARTS
AND CLEAN
DRYER DRUM
Wipe drum with clean rag and soap
diluted in warm water to remove
any oil used in manufacturing. Make
a paste of laundry detergent and
clean drum if necessary.
To reverse the direction that the
door opens, see the User's Guide•
7
J
J
Questions ?
See the User's Guide or
call Maytag Appliances
Sales Company
1-800-688-9900 USA
1-800-688-2002
Canada
1-800-688-2080
TTY USA Only
Optional Kits
Kits are available at extra cost
through your Maytag dealer or
Maytag Customer Assistance at
1-800-688-9900 USA
1-800-688-2002 Canada
1-800-688-2080 TTY USA Only
Directional Exhaust Kit
DK1 Sales Accessory (Directional
Exhaust Kit #528P3).
Flexible Metal Vent Kit
Exhausting the dryer in hard-to-
reach locations can be accom-
plished by installing Kit # 521P3.
Manufactured (Mobile) Home
Installation Kit
Manufactured home anchor Kit
#526P3.
Propane Gas Conversion Kit
LPK1 Sales Accessory
(L.P./Propane Kit # 649P3).
Part No. 40136401 Printed in U.S.A. 11/01

Maytag SDG3606AWW Specifications

General

Brand	Maytag
Model Number	SDG3606AWW
Type	Dryer
Fuel Type	Gas
Capacity	7.0 cu. ft.
Color	White
Voltage	120V
Amperage	15A
Number of Temperature Settings	5
Warranty	1 Year Limited
Width	29 in
Height	43 in

Summary

Remove Parts and Clean Dryer Drum

Connect Dryer to Exhaust System

Exhaust System Materials

Details on acceptable and unacceptable exhaust duct materials, including rigid metal, semirigid, foil, and plastic.

Maximum Exhaust Length

Tables specifying maximum exhaust duct lengths based on elbows and duct type for optimal performance.

Exhaust Directions

Information on approved dryer venting directions and optional kits for side or bottom exhaust.

Connect Gas Supply

L.P. Propane Gas Conversion

Instructions for converting the gas valve for L.P./Propane gas service using a specific conversion kit.

Test for Gas Leaks

Step-by-step guide to test gas connections for leaks using soap suds after installation.

Connect Power Cord to Electricity

Guidance on plugging the dryer into a grounded outlet, specifying voltage and amperage requirements.

Position and Level Dryer

Instructions for placing the dryer in its final location and adjusting leveling legs for stability.

Important Safety Information

Grounding and Electrical Safety

Covers ground wire function, proper grounding instructions, and electrical safety precautions to avoid shock.

Exhaust System Safety

Critical warnings regarding proper dryer exhaust to prevent fire, including duct material and installation requirements.

Gas Safety and Fire Prevention

Guidelines for safe gas handling and measures to prevent fire or explosion, including actions if gas is detected.

Installation Requirements

Location Requirements

Guidance on selecting a suitable installation location, including air supply and clearance for mobile homes.

Electrical Requirements

Specifications for the required power supply, voltage, amperage, and grounding plug for the dryer.

Gas Supply Requirements

Details on natural gas and L.P. gas pressure, conversion kits, and compliance with gas codes.

Exhaust System Requirements

Guidelines for proper dryer exhaust, including duct type, length, static pressure, and joint sealing.

Installation Checks and Adjustments

Checking Burner Flame

Procedure to observe and verify the burner flame for proper color and uniformity after ignition.

Adjusting Air Flow to Burner

Instructions on how to adjust the air shutter for a soft, uniform blue flame, indicating correct air mixture.