EasyManua.ls Logo

Maytag SDE4606AYW User Manual

Maytag SDE4606AYW
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
L' RMA AG
Installation
Instructions
Electric Dryer
Keep instructions for future reference.
Be sure manual stays with dryer.
Questions ?
See the User's Guide or
call Maytag Appliances
Sales Company
1-800-688-9900 USA
1-800-688-2002
Canada
1-800-688-2080
TTY USA Only
f
You'll Need a Few Things Before You Begin
Duct Tape
Power Cord
(3=wire or 4=wire)
and Strain Relief
sc ows 2f 2
(supplied)
Wrench
Screw
Drivers
Level
Jj
f
REMOVE PARTS
AND CLEAN
DRYER DRUM
Wipe drum with clean rag and soap
diluted in warm water to remove
any oil used in manufacturing. Make
a paste of laundry detergent and
clean drum if necessary.
To reverse the direction that door
opens, see the User's Guide.
Part No. 40136301
Printed in U.S.A. 11/01
Optional Kits
Kits are available at extra cost
through your Maytag dealer or
Maytag Customer Assistance at
1-800-688-9900 USA
1-800-688-2002 Canada
1-800-688-2080 TTY USA Only
Directional Exhaust Kit
DK1 Sales Accessory (Directional
Exhaust Kit #528P3).
Flexible Metal Vent Kit
Exhausting the dryer in hard-to-
reach locations can be accom-
plished by installing Kit # 521P3.
Question and Answer IconNeed help?

Do you have a question about the Maytag SDE4606AYW and is the answer not in the manual?

Maytag SDE4606AYW Specifications

General IconGeneral
BrandMaytag
ModelSDE4606AYW
CategoryDryer
LanguageEnglish

Summary

Initial Setup and Preparation

Remove Parts and Clean Dryer Drum

Wipe the dryer drum with a clean rag and soap to remove manufacturing oils.

Tools and Materials Needed

List of items required before starting installation, such as power cord, wrench, and level.

Optional Kits

Information on purchasing optional kits like directional exhaust and flexible metal vent kits.

Connect Dryer to Exhaust System

Exhaust System Materials

Details on recommended and prohibited exhaust duct materials like rigid metal and plastic pipe.

Maximum Exhaust Length

Tables specifying maximum exhaust duct lengths based on elbows and duct type.

Exhaust Directions

Information on how the dryer can be exhausted through the back, left, right, or bottom.

Connect Electrical Cord

3-wire or 4-wire Plug Connection

Instructions for connecting a 3-wire or 4-wire power cord to the dryer's terminal block.

4-wire Plug Only

Specific grounding instructions for a 4-wire power cord connection.

Position and Level Dryer

Leveling the Dryer

Guide on adjusting the dryer's legs to ensure it is level side to side and front to back.

Important Safety Information

About Ground Wires

Explanation of ground wires and their function in preventing electric shock.

Grounding Instructions

Details on properly grounding the dryer according to electrical codes and standards.

General Safety Warnings

Crucial warnings regarding fire risk, electrical shock, and personal injury.

Installation Requirements

Location Requirements

Guidelines for selecting an installation location with adequate air supply and proper flooring.

Electrical Requirements

Specifications for the electrical supply needed, including voltage, amperage, and phase.

Exhaust Requirements

Mandatory exhaust system requirements, including duct type, length, and termination.

Dryer Dimensions and Minimum Clearances

Dimensions and Clearances

Diagrams showing dryer dimensions and required clearances for installation.

Related product manuals